We are currently carrying out specialist concrete cutting works at Olympia for a new restaurant fit-out. The scope involved cutting an existing concrete staircase in half through 350 mm thick concrete at a 45-degree angle. The works required a high level of precision to ensure a clean, accurate cut while maintaining structural integrity for the client’s requirements.
We completed specialist track sawing works for Kelf Civil Engineering on Brighton Road, London, to allow for the installation of structural steelwork within existing walls. Due to site constraints, all works were carried out during night hours. All operatives were IPAF trained and certified to safely operate scissor lifts when working at height, ensuring full compliance with health and safety requirements.
Our red Hilti track saw machine in action, cutting a set of concrete stairs in a building in Olympia for a new restaurant. The machine is positioned on a metal track that is secured to the stairs, guiding the cutting blade precisely. The cut is being made at a 45-degree angle through a 350mm thick concrete slab, effectively cutting the stairs in half for a client.
BC Diamond Drilling & Sawing Ltd was called out to Lincolnshire by OBM.
We were called out because a wall and concrete shuttering wasn’t bolted up properly. So, we had to cut it out, so they can rebuild it correctly.
Conducted track sawing and brokk demolition through 450mm reinforced concrete walls of 4.5m wide by 5m height.
Modus Construction Consultants urgently contacted BC Diamond Drilling & Sawing Ltd to create an opening. We needed to prepare the Hastings site efficiently because bricklayers were due to arrive the following week in order to start building 5 blocks of flats.
We cut 550mm deep straight edge using the track saw through reinforced concrete slabs. Then began to stitch drill holes of 180mm diameter as the opening was too small to use the track saw.
A resident of a flat close to London Victoria train station contacted BC Diamond Drilling & Sawing Ltd to create a wall opening.